Product added to cart
The ultimate camera for the stable! The camera gives a very bright image and has up to 20 meters of night vision thanks to the powerful infrared LEDs. In addition, the camera is equipped with a 2.8mm wide-angle lens with a viewing angle of 106 degrees, so the entire stable is visible.
This camera is easy to install, there is only a cable needed for power, the image goes via wifi (via a cable is also possible, the antenna can be removed). After the camera is connected to the internet, the picture can be seen via the mobile app.
- 2 Megapixel camera (Full HD)
- Wi-Fi, but a wired connection is possible too
- 8x Zoom
- Auto-IR LED - Night vision by 30 LEDs (up to 20 meters)
- 2.8 mm lens (107 degrees wide angle so the entire stable is visible)
- SD recording capability (max. 64GB micro-SD card)
- Movement detection with area exclusion to prevent false alarms
- Waterproof (IP66)
Tip: The easiest way is to first install the camera using a wired connection and then add it to the app. After that, you can set up the camera in the app to connect to the appropriate Wi-Fi network. Once this is done, the camera can be disconnected from the cable and it will connect to the Wi-Fi network on its own.
€98.15
€109.00
Fast shipping
In stock products will be shipped the same day
Questions?
Call +31 527 522 125
Money back guarantee
14 days return policy
Safe payment methods
Creditcard & PayPal
Live demo of the image quality!
This camera is very easy to install and expand with multiple cameras, each camera only needs 1 cable for the power supply. All accessories for installation are included.
For Android and iPhone / iPad an app (Foscam) is available which is very easy to install in 3 steps. Download the app, scan the code and after installation the image of the camera is immediately visible. The app allows you to see the video stream of the camera everywhere, also via mobile internet!
What is in the box?
- Birth Alarm Foscam StableCam HD outdoor camera with infrared night vision
- Power adapter
- Network cable
How does the installation work?
- Connect the power adapter to the camera so that it turns on, there must be a strong wifi signal.
- Download the app "Foscam" from the App Store (available for Android and iOS)
- Register in the app, then you can add the camera to the app by scanning the QR code on the bottom of the camera.
- Everything is now ready for use. Do you have problems with the installation? Please contact us and we will gladly help you further
Specifications
Type | Birth Alarm Foscam StableCam HD |
Sensor type | 1/3"CMOS |
Resolution | 2.0 MegaPixels(1920*1080) |
Frame rate | 30fps |
IR CUT | √ |
Lens type | f:2.8mm or 4mm,F:1.2 |
Viewing angle | 106° |
Infrared mode | Autmatic or manual |
Night vision | 20 meters |
Ethernet | √ |
Wifi | IEEE 802.11b/g/n |
Storage | Max 64 GB Micro SD |
Brand | Birth Alarm |
---|
We found other products you might like!
Write Your Own Review